4601 I-V Meter Operation Manual
6.2.3 Setting GPIB
6-4
6.2.3
Setting GPIB
This section describes the procedure of changing the GPIB address and the output format.
Changing the GPIB address from 01 to 12
Changing the output format from ASCII to binary
Operating procedure
Press .
The
MENU
key goes ON.
Example display
Press
or
or rotate the rotary knob to select
H) INTERFACE
from the categories.
Example display
Press
to move to the lower level.
Example display
Check that the interface is set to GPIB.
Press
or
or rotate the rotary knob to select
2) GPIB Address
from the parameters.
Example display
Press
to move to the lower level.
Example display
1
2
3
4
5
