ADC HIGAIN HXU-359, Manual

Page: 27 / 76

150-359-100-01, Revision 01 Provisioning
HXU-359 List 1 October 27, 2000 17
S
ETTING UP A
C
ROSS
-C
ONNECT
M
AP
The HXU-359 is comprised of 7 four-input muxes which are connected to the
DS1 channels. Four DS1 channels feed into each VT group mux. The outputs
of the seven multiplexers are multiplexed into a single STS-1 stream.
The HXU-359 supports two cross-connect mapping schemes, transparent and
interleaved, that allow you to automatically configure 28 DS1 lines. The
default configuration is interleaved mapping.
Figure 12 on page 19 and
Figure 13 on page 20 show the two different mapping schemes.
Figure 11. Config Menu: X-Connect
To determine the current mapping mode, view the Services
submenu under Config and note the VT and VG mapping
relationships.
Figure 12 on page 19 and Figure 13 on page 20
are graphical representations of transparent and interleaved
mapping.