150-359-100-01, Revision 01
Provisioning
HXU-359 List 1
October 27, 2000
7
P
ROVISIONING
In a Soneplex Wideband 3190, the HMU-319 manages the HXU-359 by
using Terminal Access Option (TAO) software. When installed in the
ACE-358 chassis, the HXU-359 can also be provisioned directly from the
HXU craft port.
Refer to the Soneplex Wideband 3190 Installation Manual and the technical
practice for the HMU-319 List 7A for complete information about connecting
a maintenance terminal.
Also, refer to your Central Office (CO) system plans for provisioning details.
A
CCESSING
THE
M
ANAGEMENT
I
NTERFACE
The HiGain Management Unit interface presents the user with an interactive,
text-based, menu-driven interface that configures, monitors, and controls a
Soneplex Wideband 3190 and all its components. By connecting a local or
remote maintenance terminal to the HMU-319 List 7A, you can access the
craft port user interface for system provisioning and performance monitoring,
including the HXU. (Switches 3 and 5 on SW2 must be set to the Off position
to activate the HMU craft port and OSTS protocol.)
shows the general structure of the TAO software. It
provides access to the maintenance terminal screens and to the HXU-359
management screens.
You can also directly connect the maintenance terminal to the
HXU if it has been activated as described in Step 3,
Installation,
. The default password for access to the
HXU screens when connected to the HXU craft port is
“public.”
For more information about the HMU, refer to the technical
practice for the HMU-319 List 7A and to the Provisioning
Reference section of the Soneplex Wideband 3190
Installation Manual.
