ADC Digivance CXD Operation Manual Download | Manualshive

Page: 67 / 74

background image

ADCP-75-192 • Issue 2 • June 2007

Page 55

© 2007, ADC Telecommunications, Inc.

• In the event that a spare CPU cannot be updated because of the above restriction, the CPU

will have to be upgraded on a standalone chassis that is not resident on the fielded system
or be returned to the factory for upgrading.

• It is NOT possible to update a spare Hub Master CPU while the fielded system's Hub

Master is still installed, because two Hub Masters in the same domain will cause chaos on
the network. The only way to update the software on a spare Hub Master CPU in a fielded
system is to unplug the Ethernet cable from the original Hub Master CPU and plug that
cable into the spare Hub Master CPU. When the upgrade of the spare Hub Master CPU is
complete, the Ethernet cable can be plugged back into the original Hub Master CPU.

4.6

MIB Extraction

MIB extraction is needed to update the NMS after a software update:

• Once the software upgrade is complete, FTP to one of the updated CPUs, logging in as

username = operator and password = operate.

• Change to the MIB directory by entering:

cd /usr/share/mibs/transept/

• Extract/get all of the MIB text files located there by entering:

mget TRANSCEPT-*.txt

,

answering yes to each prompt.

• Extracting the MIBs in this fashion will ensure that the correct and compatible versions of

all of MIBs are compiled into the NMS.

• Alternatively, the MIBs can all be extracted in the form of a tarball by executing the

following steps:

• FTP to one of the updated CPUs, logging in as username = operator and password =

operate.

• Change to the directory containing the ADC MIBs directory by entering:

cd /usr/share/mibs/

• Bundle and zip all the MIBs into a tarball and extract them by entering:

get

transcept.tar.gz.

Caution:

It is highly recommended that spare CPUs not slated for immediate installation are

upgraded in a dedicated chassis in a depot or warehouse environment.

«
...
65
66
67
68
69
...
»

Summary of Contents for Digivance CXD











































































Reviews:

No comments

Related manuals for Digivance CXD

Brand: Williams Sound Pages: 4

Brand: TERK Technologies Pages: 16

Brand: Streakwave Pages: 15

Brand: WADE Antenna, Inc. Pages: 5

Brand: Winegard Pages: 5

Brand: ALLIANCE Pages: 4

Brand: Ubiquiti Pages: 28

Brand: Steren Pages: 2

Brand: Logik Pages: 2

Brand: Lectronics Pages: 12

Brand: zBoost Pages: 9

Brand: Ubiquiti Pages: 10

Brand: NARDA Pages: 56

Brand: Hama Pages: 38

Brand: Kathrein Pages: 72

Brand: Kathrein Pages: 4

Brand: Konig Pages: 24

Brand: Advanced Navigation Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands