ADCP-75-192 • Issue 2 • June 2007 • Preface
Page 7
© 2007, ADC Telecommunications, Inc.
SAFE WORKING DISTANCES
The Digivance CXD/NXD antenna, which is mounted on top of a pole, radiates radio frequency
energy.
For the occupational worker, safe working distance from the antenna depends on the workers
location with respect to the antenna and the number of wireless service providers being serviced
by that antenna.
Emission limits are from OET Bulletin 65 Edition 97-01, Table 1 A.
STANDARDS CERTIFICATION
FCC
: The
Digivance CXD/NXD
complies
with
the
applicable
sections
of
Title
47
CFR
Part
15, 22, 24 and 90.
The Digivance CXD/NXD Hub has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications.
Changes and modifications not expressly approved by the manufacturer or registrant of this
equipment can void your authority to operate this equipment under Federal Communications
Commissions rules.
In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio & television reception.
ETL
: This
equipment
complies
with
ANSI/UL 60950-1
Information Technology
Equipment.
This
equipment
provides
the
degree
of
protection
specified
by
IP24
as defined
in
IEC
Publication
529.
Ethernet signals are not for outside plant use.
FDA/CDRH
: This
equipment
uses
a
Class
1
LASER
according
to
FDA/CDRH
Rules.
This
product
conforms
to
all
applicable
standards
of
21
CFR
Part
1040.
IC
: This
equipment
complies
with
the
applicable
sections
of
RSS-131.
The
term
“IC:”
before
the radio
certification
number
only
signifies
that
Industry
Canada
Technical
Specifications
were
met.
LIST OF ACRONYMS AND ABBREVIATIONS
The acronyms and abbreviations used in this manual are detailed in the following list:
AC
Alternating Current
ANT
Multiband Antenna
Summary of Contents for Digivance CXD
Page 12: ...ADCP 75 192 Issue 2 June 2007 Preface Page 10 2007 ADC Telecommunications Inc ...
Page 73: ......
Page 74: ...i www adc com ...
