ADC Campus-REX2 RS, User Manual

Page: 82 / 166

Chapter 4 - Managing System Parameters
70 Campus-REX2 RS Interface Card User Manual
R
ESTORING
D
EFAULT
V
ALUES
You can restore all (any configurable parameter including HDSL and
network, for example) of the configuration options to their original factory
default values. This is a way to reset configurations you may have changed
and want returned to its original settings.
1 From the Main Menu, type then press .
The System Parameters screen is displayed.
3 ENTER
Jul 07, 2003 ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID: Southall Quad 4 Local I/F: REX2
Remote Unit ID: Inactive Remote I/F: Inactive
Circuit ID: Southeast line 421
MAIN MENU
1) SYSTEM STATUS
2) REX2 CONFIGURATION AND STATUS
3) SYSTEM CONFIGURATION
4) MAINTENANCE
5) REMOTE LOGON
(L)ogout
ENTER CHOICE>
Jul 07, 2003 ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID: Southall Quad 4 Local I/F: REX2
Remote Unit ID: Inactive Remote I/F: Inactive
Circuit ID: Southeast line 421
SYSTEM PARAMETERS
1) CHANGE SYSTEM TIME
2) CHANGE SYSTEM DATE
3) CHANGE UNIT ID
4) CHANGE CIRCUIT ID
5) CHANGE UNIT PASSWORD
6) HDSL ES Alarm Threshold: Disabled (Disabled, 17, 170)
7) HDSL Margin Alarm Threshold: Disabled
8) Local Data Port LOS Alarm: Disabled (Disabled, Enabled)
9) Remote Data Port LOS Alarm: Disabled (Disabled, Enabled)
10) RESTORE FACTORY DEFAULTS
(R)eturn (M)ain Menu
ENTER CHOICE>