ADC Campus-REX2 RS, User Manual

Page: 65 / 166

Chapter 3 - Configuring the REX2
Campus-REX2 RS Interface Card User Manual 53
4 To manage the Static Route Table, type then press . The Static
Route Table is displayed. You can also add static routes on this screen
(see
“Managing the Static Routing Table” on page 57 ).
5 Type then press to return to the Router Configuration screen
( page 3-46 ). (Typing will return you to the Main Menu.)
6 If you are only adding a static route, go to “Saving the Router
Configuration” on page 55 to save your changes.
Configuring DHCP Services
When the Campus-REX2 is configured for DHCP relay, it forwards
DHCP requests from devices connected to the Campus-REX2 LAN port to
a DHCP server which can be on the LAN or WAN side of the network.
You can enter IP addresses for a primary (required) and secondary (optional)
DHCP server. The Campus-REX2 will attempt to send a DHCP relay to the
primary DHCP server first, and then will relay to the secondary server if the
primary is not available. For more information, see
“DHCP” on page 134 .
1 From the Router Configuration screen ( page 3-46 ), type then press
. The DHCP Services screen is displayed.
The default configuration is that no DHCP services (None) are provided
by the Campus-REX2.
3
ENTER
R
ENTER
M
7
ENTER
Jul 07, 2003 ADC TELECOMMUNICATIONS, CAMPUS RS, Version 5.1 08:19:34
Local Unit ID: Local I/F: REX2
Remote Unit ID: Inactive Remote I/F: Inactive
Circuit ID:
DHCP SERVICES
1) Service: None (None, Relay)
(R)eturn (M)ain Menu
ENTER CHOICE>