ADC Campus-REX2 RS, User Manual

Page: 110 / 166

Chapter 7 - Using the LCD for Configuration and Management
98 Campus-REX2 RS Interface Card User Manual
N
AVIGATING THE
LCD M
ENUS
Use the LCD and the menu buttons on the desktop unit or CMU to navigate
the menus and configure the Campus-RS system. The illustration below
shows the LCD and menu buttons on the desktop unit. See the Campus-Star
Chassis User Manual for the location of the LCD and menu buttons on the
CMU.
The following table describes how to use the menu buttons to move through
the menus and select items.
Instructions for setting individual configuration options are included with
each option. The basic procedure is:
1 Press Escape until
CAMPUS RS I/F: REX2
is displayed.
2 Press Next until the preferred menu name is displayed.
3 Press Enter to access the menu options.
4 Press Next until the preferred option name is displayed.
5 Press Enter to access the settings for the option.
Button Function
Next Scrolls to the next LCD menu or option at the same level of the
menu structure
Enter
Selects the displayed LCD menu or option
Escape Returns to the previous LCD menu selection
LCD HDSL LED
Port LED Test LED
Menu buttons
Next
Enter
Escape
HDSL
Test
Port
LCD Menu buttons