Set Up the Campus-REX System
Campus-REX RS Interface Card User Manual
3-11
7
Press Enter.
8
Press Next until the desired Loop Mode setting displays, then press
Enter.
LOOP MODE
displays.
9
Press Next.
HDSL RATE
displays.
10
Press Enter.
11
Press Next until the desired HDSL transmission rate displays, then
press Enter.
To continue setting up the system, proceed to
as a Bridge or Router” on page 3-19
Using an ASCII Terminal
The steps in this section use an ASCII terminal. To set the HDSL
transmission rate:
1
Follow the steps in
“Set Up an ASCII Terminal” on page 3-2
to connect
the ASCII terminal and log on to the Main Menu.
2
From the Main Menu, type
then press
. The System Settings
Menu displays.
3
ENTER
May 3, 1999
ADC DSL SYSTEMS INC., CAMPUS RS, Version x.xx
13:18:41
Local Unit ID:
Campus-REX Unit #34
Local I/F:
REX
Remote Unit ID: Campus-REX Unit #12
Remote I/F: REX
Circuit ID:
Network Extension Circuit 5001
SYSTEM SETTINGS MENU
1)
SYSTEM PARAMETERS
2)
HDSL PARAMETERS
(R)eturn
ENTER CHOICE>
CAD1069i5.book Page 11 Thursday, May 30, 2002 7:32 AM