ADC AVIDIA SWD4573I1, User Manual

Page: 626 / 658

Performing System Diagnostics
600 Avidia System Configuration and Management User Manual
2 From the
NAND EEPROM/DOSFS Menu
you can do the following:
• Test the read/write functionality of the NAND EEPROM by typing
t
then pressing
. The system runs a test and reports the results on the screen.
• View a directory of the files contained in the management card NVRAM by type
d
then pressing . You may want to do this to verify that the image file was
successfully downloaded from the boot server.
• Specify a file to boot from the management card by typing
l <filename>
then
pressing , where
<filename>
is the complete filename and extension of the
file you want to load. You may want to do this to load a different image file than the
file that is set as the default boot file.
• View the content of any text file by typing
r <filename>
then pressing ,
where
<filename>
is the complete filename and extension of the file you want to
view.
• To make the amcprof.txt file on the management card read-only, type
n
. The
amcprof.txt file contains the management card hardware and software serial and
revision numbers.
• To view binary image file information, such as the version number, processor name
and revision number, type
v <filename>
where
<filename>
is the complete
file name and extension of the binary file for which you want to view information.
• If the EEPROM Test (option
t
) fails, which indicates that the EEPROM has been
corrupted, type
u
then press to reformat the EEPROM. The EEPROM is
reformatted (restored to its original factory condition).
• Type
x
then press to return to the
DMU Test Main Menu
.
Testing the TRAM CUBIT
From the
DMU Test Main Menu
, type
3
then press . The system tests the CUBIT,
reports the results on the screen, and displays the
DMU Test Main Menu
.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER