ADC AVIDIA SWD4573I1, User Manual

Page: 267 / 658

Chapter 10: Configuring Bridging and Routing
Avidia System Configuration and Management User Manual 241
A screen similar to the following displays.
Deleting IP ARP Table Entries
1 From the
::arptb=>
prompt, type
show
then press to display the configured
sessions.
2 Note the index number of the IP ARP Table entry you want to delete.
3 Type the delete command in the following format then press .
delete <index>
Parameter
<index>
The IP ARP Table index number of the entry you want to delete.
Information Description
Index The IP ARP Table row index number.
Slot
Port The slot and port on which the IP ARP entry was learned. The
management card is always installed in slot 1 and, currently,
the management card only has one Ethernet port, therefore
these values are always 1.
IPAddr The IP address that is mapped to the corresponding MAC
address.
MacAddr The MAC address that is mapped to the corresponding IP
address.
Type The type of entry, either dynamic (learned) or static (entered
manually).
::arptb=> show
Index Slot Port IPAddr MacAddr Type
1 1 1 10.0.0.120 00:10:4b:24:15:a3 dynamic
2 1 1 10.0.0.121 00:60:97:bd:eb:bb dynamic
3 1 1 10.0.11.37 00:20:a7:10:00:52 static
ENTER
ENTER