ADC AVIDIA SWD4573I1, User Manual

Page: 193 / 658

Chapter 8: Configuring ATM Virtual Circuits
Avidia System Configuration and Management User Manual 167
Parameter
<index>
The PVPC Table row index number of the primary PVPC for which you want to switch
traffic from the backup PVPC back to the primary PVPC.
Example
::pvpc=> restore 3
Changing Cell Channel Card PVPC Admin Status
1 From the
::pvpc=>
prompt, type
show
then press to display the configured
parameters for all PVPCs.
2 Note the index number of the PVPC for which you want to change the status.
3 Type the admin command in the following format then press .
admin <index> (up|down)
Parameters
<index>
The index number of the PVPC you want to activate or deactivate.
(up|down)
Type
up
to activate the PVPC; type
down
to deactivate it.
Example
::pvpc=> admin 2 up
ENTER
ENTER