ADC 150-2248-01 User Manual Download | Manualshive

Page: 52 / 74

background image

Troubleshooting

150-432-100-02, Revision 02

44

July 18, 2002

HLU-432 List 1

Initiating a Manual Loopback Session

A manual loopback session allows you to select any one of the HiGain GNLB loopbacks listed in

with the exception of SmartJack loopbacks, which can only be issued by inband commands.

Setting the Loopback Time-out Option

Before initiating a loopback session, verify that the Loopback Time-out parameter is set to the desired setting.

1

Use the MODE and SEL buttons as described in

“Setting Options through MODE and SEL” on page 10

.

(The Loopback Time-out parameter is also user-selectable from the System Settings screen when using a
maintenance terminal.)

2

Enter the desired setting:

•

NONE (no time-out)

•

20 minutes

•

60 minutes (default setting)

•

120 minutes

Initiating a Manual Loopback Session

To initiate a manual loopback session:

1

Press both the MODE and SEL buttons on the front panel for at least 3 seconds. The following message
appears on the front-panel display:

MAN LPBK NLO?

2

Press SEL to activate NLOC. The display changes to

MAN LPBK NLOC

.

3

Press MODE to advance to the next available loopback (ND1? ND2? ND3? ND4? NRE? CRE? CD1? CD2?
CD3? CD4? CLO?).

4

Press SEL to activate the selected loopback. The previous loopback is terminated.

Once a loopback is selected and activated, the loopback stays active until it times out (based on the LBTO setting).
When a loopback times out, the display then returns to the normal display mode.

With the exception of SmartJack, any of the HiGain loopbacks can be executed using the MODE
and SEL buttons.

When executing a manual loopback session using the MODE and SEL buttons:

•

The next loopback option can be presented by pressing the MODE button, however, the
previously activated loopback remains active until the SEL button is pressed, which
activates the new loopback.

•

If neither button is pressed for a period of 30 seconds and no loopback is in effect, the
manual loopback session terminates and the display returns to normal mode.

•

If any loopback is in effect, the 30-second time-out is inhibited. The active loopback and the
manual loopback sessions continue until the loopback times out in accordance with the
LBTO setting.

•

Only the SMJK loopback can exist with other network loopbacks at any given time.

•

If there is an active loopback, pressing the MODE and SEL buttons for 3 or more seconds
terminates any active loopback, ends the manual loopback session, and returns the display
to normal mode.

«
...
50
51
52
53
54
...
»

Summary of Contents for 150-2248-01











































































Reviews:

No comments

Related manuals for 150-2248-01

Brand: 3Com Pages: 8

8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink

Brand: Tyco Electronics Pages: 18

OfficeConnect 1600

Brand: 3Com Pages: 8

Brand: 3Com Pages: 8

Brand: IBM Pages: 32

Brand: Xinje Pages: 76

Brand: Salusfin Pages: 6

Brand: Oracle Pages: 112

Brand: LevelOne Pages: 31

Brand: BSD Networks Pages: 7

Brand: Ubiquiti Pages: 20

Brand: AMG Systems Pages: 2

Brand: ADTRAN Pages: 2

Brand: Caton Pages: 18

Brand: Aaeon Pages: 61

Brand: Gigabyte Pages: 18

GSM7224v2 - Layer 2 Managed Gigabit Switch

Brand: NETGEAR Pages: 3

Brand: Supermicro Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands