ADC 150-2204-01, User Manual

Page: 30 / 56

Installation 150-506-100-03
22 March 28, 2000 HRE-506 List 1 and List 2
P
IVOTING THE
E
NCLOSURE
All HRE-506 units have access to an order wire terminal pair, as shown in Figure 1 on page 2 and Figure 3 on
page 5 . The enclosure mounting plate allows the unit to be tilted 31° from its vertical position, as shown in
Figure 4 on page 9 . This reduces the headroom required in manhole installations from 10 inches to less than 3
inches and the amount of valuable air space required for such underground applications.
To pivot the enclosure out from its vertical position:
1 Loosen the four bolts that connect the pivot bracket to the enclosure base plate.
2 Lift the housing up slightly and pull it out until the top bolts rest against the end of the two pivot bracket slots.