Programming Your Remote Control
Programming with Automatic Search:
• Start with the TV turned on.
• Press & release the TV button
.
• Press & hold the RCU SETUP button
until the TV button
blinks twice.
• Enter 9-9-1. The TV button
will
blink twice. (9-9-1 should NOT appear
on the TV screen)
• Aim the remote at the TV, then Press
& release the POWER button
.
• Press & release the CH+ or CH-
(Channel) button continuously until
the TV turns off.
• Press the POWER button
to turn
the TV back on.
• Press the RCU SETUP button
to
store the code for the TV. The TV
button
will blink twice.
Notes: If either the CH (Channel) or VOL
(Volume) buttons don’t function correctly you
may need to go through the steps above again
until the remote finds another code for the TV.
By default the TV channel should be set to
Channel 3. Please make a note if the MHTC
technician states otherwise.
Volume Lock:
Control the volume on your TV regardless
of what “device” is selected (TV, STB, etc):
• Press & release the TV button
.
• Press & hold the RCU SETUP button
until the TV button
blinks twice.
• Enter 9-9-3.
• Press & release the TV button
. The
TV button will blink twice.
Programming One Touch Power:
Control the power to the TV without
turning off the Set-Top Box. (2 Steps)
Step 1 - Clearing One-Touch Power:
• Press & release the STB button
.
• Press & hold the RCU SETUP button
until the STB button
blinks twice.
• Enter 9-8-0. The STB button
will
blink several times.
Step 2 - Setting One-Touch Power:
• Press & release the STB button
.
• Press & hold the RCU SETUP button
until the STB button
blinks twice.
• Enter 9-9-5.
• Press & release the POWER button
.
• Press & release the TV button
.
• Press & release the POWER button
.
• Press & release the STB Button
.
• Press & hold the RCU SETUP button
until the STB button
blinks twice.
• Press POWER
to test if successful
(TV should turn off while Set-top box
remains on); if not you must repeat
both Step 1 and Step 2.
The Learning Feature:
Transfer functions from a FACTORY
remote control to the MHTC remote.
These instructions are available on our
website, www.mhtc.net.
Mount Horeb Office 437-5551
Dodgeville Office 930-9985
Tech Support: 1-800-843-5827
TV Button
RCU SETUP
Button
POWER
Button
CH
(Channel)
+/- Button
STB Button
Programming Your Remote Control
Programming with Automatic Search:
• Start with the TV turned on.
• Press & release the TV button
.
• Press & hold the RCU SETUP button
until the TV button
blinks twice.
• Enter 9-9-1. The TV button
will
blink twice. (9-9-1 should NOT appear
on the TV screen)
• Aim the remote at the TV, then Press
& release the POWER button
.
• Press & release the CH+ or CH-
(Channel) button continuously until
the TV turns off.
• Press the POWER button
to turn
the TV back on.
• Press the RCU SETUP button
to
store the code for the TV. The TV
button
will blink twice.
Notes: If either the CH (Channel) or VOL
(Volume) buttons don’t function correctly you
may need to go through the steps above again
until the remote finds another code for the TV.
By default the TV channel should be set to
Channel 3. Please make a note if the MHTC
technician states otherwise.
Volume Lock:
Control the volume on your TV regardless
of what “device” is selected (TV, STB, etc):
• Press & release the TV button
.
• Press & hold the RCU SETUP button
until the TV button
blinks twice.
• Enter 9-9-3.
• Press & release the TV button
. The
TV button will blink twice.
Programming One Touch Power:
Control the power to the TV without
turning off the Set-Top Box. (2 Steps)
Step 1 - Clearing One-Touch Power:
• Press & release the STB button
.
• Press & hold the RCU SETUP button
until the STB button
blinks twice.
• Enter 9-8-0. The STB button
will
blink several times.
Step 2 - Setting One-Touch Power:
• Press & release the STB button
.
• Press & hold the RCU SETUP button
until the STB button
blinks twice.
• Enter 9-9-5.
• Press & release the POWER button
.
• Press & release the TV button
.
• Press & release the POWER button
.
• Press & release the STB Button
.
• Press & hold the RCU SETUP button
until the STB button
blinks twice.
• Press POWER
to test if successful
(TV should turn off while Set-top box
remains on); if not you must repeat
both Step 1 and Step 2.
The Learning Feature:
Transfer functions from a FACTORY
remote control to the MHTC remote.
These instructions are available on our
website, www.mhtc.net.
Mount Horeb Office 437-5551
Dodgeville Office 930-9985
Tech Support: 1-800-843-5827
TV Button
RCU SETUP
Button
POWER
Button
CH
(Channel)
+/- Button
STB Button
