ADB EURODIM TWIN TECH, Installation Manual

Page: 39 / 166

EURODIM TWIN TECH
www.adblighting.com Installation manual - Page 37
Version 1.2
9. CHARACTERISTICS
9.1 Electrical characteristics
Supply voltage: 3 NPE 400 TN-S or TN-C
Operating voltage:
198 V to 264 V, 50/60 Hz.
Max line current:
600 A per phase
600 A for the Neutral
(due to the possibility of unbalanced 3phase system, the neutral
supply cable shall be oversized by 125% compared to the phases)
Max derating factor: 600 A / 1.25 = 480A
480 A x 3 x 230 V = 331 kW
- cabinet fully fitted with 4 x 3 kW modules: 384 kW (= 0.86)
- cabinet fully fitted with 4 x 2.5 kW modules: 320 kW (= 0.96)
- cabinet fully fitted with 3 x 5 kW modules: 320 kW (= 0.68)
Fault current rating: 50 kA
Capacity of the cabinet
- 32 x Dimmer modules 4 x 3 kW (thyristors)
- 32 x Dimmer modules 3 x 5 kW (thyristors)
- 32 x Dimmer modules 4 x 2.5 kW (sine wave)
- 32 x Dimmer modules 3 x 5 kW (sine wave)
- Or any mix thereof.
Control inputs of each processor unit:
- Two digital inputs according to DMX512-A (ANSI E1.11).
- One Ethernet port, incl. three ArtNet inputs (Art-DMX).
- Ports are galvanically isolated to 2500 V.
Dynamic performance : no overshoot nor oscillation of output voltage.
Range of regulation
DimSwitch Thyristors: full dimming of any incandescent lamp between 0% and 100% of rated
dimmer current.
Sine wave: full dimming of any incandescent lamp between 0% and 100% of rated dimmer
current.