ADB Safegate RELIANCE IQ L-852G(L), User Manual

Page: 15 / 52

3.0 Introduction
RELIANCE - the all in one revolution
The RELIANCE inset light is a bi- or unidirectional low-protrusion light-emitting diode (LED) fixture and available in three
versions:
•
RELIANCE – a LED light fixture with integrated fail open technology with CCR monitoring
compatibility.
•
RELIANCE IQ – a RELIANCE with additional and integrated intelligence (IQ) in a built in converter for
individual monitoring and control, based on RELIANCE Intelligent Lighting, ADB SAFEGATE's Individual
Light Control and Monitor System (ILCMS).
•
RELIANCE IQ0 – RELIANCE IQ light fixture with disabled IQ (ILCMS) functionality. Non-MON light
fixture with possibility to activate IQ at a later stage.
Note
RELIANCE IQ light fixtures are not fail-open light fixtures. When IQ is activated the monitoring as well as the control
functionality is handled by the ILCMS system.
The inset light fixture is a 8'' or 12'' unidirectional low-protrusion LED light fixture.
The fixture can be installed in standard 8'' or 12'' bases, in existing or new airfield lighting systems. The light fixtures are ready
for installation, each unit supplied completely assembled, tested and sealed. The electrical connection is with one or two
secondary cable to a transformer(s), equipped with an FAA L-823 plug (style 6). Each unit is individually packed in a durable,
cushioned and corrugated cardboard box, labeled with its reference name and code.
This document describes the installation, operation and maintenance of the inset light fixture.
3.1 Safety Instructions
Warning
PRIOR TO THE COMMENCEMENT OF WORK ALL ELECTRICAL SERVICES MUST BE ISOLATED FROM THE SUPPLY AND
CONNECTED TO EARTH. FULL DETAILS OF THE WORK INVOLVED MUST BE GIVEN TO THE AUTHORIZED PERSON
RESPONSIBLE FOR THE ELECTRICAL ENGINEERING SERVICES AT THE AIRPORT WITH REGARD TO THE DURATION OF
THE WORK AND SO ON... IT IS RECOMMENDED THAT PRIOR TO STARTING ANY CUTTING WORK THE NATURE AND
LOCATION OF SERVICES SUCH AS CABLE DUCTS AND SO ON. SHOULD BE IDENTIFIED ANY INSTALLATION OR
MAINTENANCE WORK SHOULD ONLY BE CARRIED OUT BY TRAINED AND EXPERIENCED PERSONNEL.
HIGH LIGHT INTENSITY! DO NOT STARE DIRECTLY INTO THE LIGHT BEAM AT A CLOSE DISTANCE.
3.2 Description of the Runway Guard light fixture
The runway guard lights warns the pilots, and drivers of vehicles when they are operating on taxiways, that they are about to
enter a runway. The inset runway guard lights are alternately yellow flashing lights that are installed across the taxiway.
3.3 Description of the Stop Bar light fixture
The stop-bar lights consist of a row of unidirectional inset red light fixtures. The stop-bar is provided at the runway holding
position and is an important tool to reduce the risk for runway incursions of aircraft and vehicles.
UM-0197, Rev. 1.0, 2019/11/19 9
Copyright
©
ADB Safegate, All Rights Reserved