ADB Safegate EREL, User Manual

Page: 27 / 50

4.3.3 Part replacement - optical cover
Parts: See § Exploded view .
•
Optical cover
•
Clip for optical cover
•
Optical cover gasket
Tools:
•
Screwdriver, Torx T20
Remove
1. Remove the screws for the optical cover clip and washers (A).
2. Remove the clip (B).
3. Remove the spacer (C).
4. Remove the optical cover (D).
5. Remove the optical cover gasket (E).
6. Dispose of the optical kit screws and washers.
7. Dispose of the optical cover gasket.
Install - Step 1
1. Make sure that all the parts are clean.
Pay extra attention to the parts where the optical cover gasket must fit.
2. Install the new optical cover gasket (A) onto the new optical cover (B).
CAUTION
Make sure that the bulges of the optical cover gasket fit smoothly into the grooves of the cooling block and the
grooves of the optical cover. The optical cover gasket is not symmetrical.
AM.03.120e, Rev. 3.4, 2019/03/29 21
Copyright
©
ADB Safegate, All Rights Reserved