Adax Neo S5 quick instruction guide
Please follow the easy instructions below for the initial set up and
programming of your new Adax Neo S5 heater.
The Adax Neo S5 heater is fully ERP 2018 compliant and will allow
the user to program one on/off period each day to help you manage
the running costs effectively.
You will now follow the instructions to set the “OFF” times within
your programming schedule.
Note: When you have set the clock to the correct time it will not
automatically show the correct time in say 50 minutes. The clock is
set once at the correct time and knows where it is in the
background settings. Do not worry that the time setting has not
moved forward.
Install the heater in the required position following the
detailed instruction drawings inside the heater box.
Plug the heater into the power supply and turn the heater On
at the switch on the right hand side – Switch should be
pointing to I.
The heater will display 20 in the small screen. Using the + or –
on the side of the heater set your ideal room temperature
now e.g 22. This will be the temperature that you require
when the heater is running a program.
The red light in the display may come on indicating the heater
is operating.
Now you need to set the day of the week and the current
time.
Push OK button constantly for 5 seconds until “td” is displayed
Release then push “OK” again once.
