Adaptive BETAbrite Director, Programming Manual

Page: 62 / 62

BetaBrite Director User Manual
56 Quick Reference Card: Message control keys
Quick Reference Card
Message control keys
Display modes and special keys
PROGRAM
To turn the sign on or off, hold down SHIFT and then press PROGRAM .
To enter messages, set the date and time, clear memory, etc., press PROGRAM and then
BACK until the setting you want to change is shown. Then press ADV to change that
setting.
RUN Press twice to exit PROGRAM mode.
APPEND Not used.
CURSOR Not used.
SPECIAL Not used.
FONT Changes between a small or large font.
WIDTH Not used.
COLOR Changes the color of text.
ROLL Not used.
WIPE
Hold down SHIFT and press 2 to use the Wipe mode in a message.
Doing this more than once cycles through all the options for direction of the wipe.
SCROLL Not used.
FLASH Hold down SHIFT and press 4 to use the Flash mode in a message.
HOLD Hold down SHIFT and press 5 to use the Hold mode in a message.
ROTATE Not used.
AUTO Hold down SHIFT and press 7 to use the Auto mode in a message.
SPEED
Hold down SHIFT and press 8 to use the Speed mode in a message.
Doing this more than once cycles through all the options for speed.
(SP1 = slowest, NHL = fastest).
TIME Hold down SHIFT and press 9 to include the time in a message.
Date Hold down SPECIAL and press M to include the date in a message.
APPEND CURSOR SPECIAL FONT WIDTH
COLOR
ON - OFF
SOUND
PROGRAM RUN
1 2 3 4 5
6
7 8 9 0
AUTO SPEED
TIME DOT
ROLL WIPE
SCROLL FLASH HOLD ROTATE
SELECT