Adaptec Snap Server 700i Series, User Manual

Page: 148 / 236

Silencing an Alarm
142 Snap Server 700i Series User’s Guide
Windows XP (No Service Pack Installed)
1
Log on to the system with a user account that has local administrator privileges.
2
From the desktop, click
Start
, point to
Programs
, point to
Accessories
, and then
click
Command Prompt
.
3
At the command prompt, enter:
ipv6 uninstall
Windows Vista
1
In the
Connections and Adapters
folder, obtain properties on all of your
connections and adapters and clear the check box next to the
Internet Protocol
version 6 (TCP/IPv6
) component in the list under
This connection uses the
following items
.
This disables IPv6 on your LAN interfaces and connections, but does not disable
IPv6 on tunnel interfaces or the IPv6 loopback interface.
2
Add this registry value (DWORD type) set to 0xFF:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\Disa
bledComponents
This disables IPv6 on all your LAN interfaces, connections, and tunnel interfaces
but does not disable the IPv6 loopback interface.
3
Restart the system.
How do I create a support archive file?
Your Adaptec Storage Manager service representative might ask you to create a
configuration and status information archive file to help diagnose a problem with
your system.
To create the archive file:
1
In the Enterprise View, select the iSCSI Storage Appliance on which the problem
is occurring.
2
In the
Actions
menu, select
Save support archive
.
3
Enter a name for the archive file or accept the default name, then click
Save
.
Silencing an Alarm
At this time, the Silence button in Adaptec Storage Manager will not silence an
alarm on iSCSI storage devices or JBODs. If an alarm sounds, you must silence it at
the device level (for instance, by pressing the Mute button on the back of the JBOD),
or use the CLI to enter a silence command (see page 177).