1
The Adaptec SCSI Card 29160 Ultra160 SCSI controller enables
you to connect up to 15 SCSI devices—such as hard disk drives,
scanners, and CD-ROM drives—to any Intel-based computer
with 32-bit or 64-bit PCI expansion slots. You can connect newer
Ultra160 and Ultra2 SCSI devices to the two 68-pin Low Voltage
Differential/Single-Ended (LVD/SE) connectors. You can also
connect legacy SCSI devices to the 68-pin and 50-pin internal
Single-Ended (SE) connectors.
Although the Adaptec SCSI Card 29160 is a 64-bit PCI card, it
also works in a 32-bit PCI slot. When installed in a 32-bit PCI
slot, the card automatically runs in the slower 32-bit mode.
This installation guide explains how to
•
Install the Adaptec SCSI Card 29160
•
Set up SCSI devices
•
Connect SCSI devices
I
NTRODUCTION
The Adaptec SCSI Card 29160 is designed for computer
system original equipment manufacturers (OEMs). Use this
product with the original computer system designed by the
OEM; each OEM tailors their product specifications for their
specific design needs. Adaptec assumes no responsibility for
incompatibility or consequential damages if you use the
Adaptec SCSI Card 29160 in another computer system. All
product support and services are provided by the OEM.
68-pin Internal LVD/SE
68-pin External LVD/SE
Connector
Connector
68-pin Internal SE
Connector
50-pin Internal SE
Connector
N
OTE
29160_OEM_InsGd.fm Page 1 Tuesday, October 19, 1999 7:47 AM
