A-7
Adaptec RAID Configuration Utility
Using the Disk Utilities
The Disk Utilities enable you to format or verify the media of your
Serial ATA hard disks.
To access the disk utilities:
1
Turn on your computer and press Ctrl+A when prompted to
access the ARC utility.
2
From the ARC menu, select Disk Utilities.
3
Select the desired disk and press Enter.
You are offered the following options:
■
Format Disk
—Simulates a low-level format of the hard
drive by writing zeros to the entire disk. Serial ATA drives
are low-level formatted at the factory and do not need to be
low-level formatted again.
Caution:
Formatting destroys all data on the drive. Be
sure to back up your data before performing this
operation.
■
Verify Disk Media
—Scans the media of a disk drive for
defects.
!
