23
3
Connect an S-Video cable from the Adaptec AVC-3610 to your
set-top box:
■
Single-tuner connection
—Use the S-Video port on the back
of the Adaptec AVC-3610 to connect to your set-top box.
■
Dual-tuner connection
—Use the S-Video port on the back of
the Adaptec AVC-3610 to connect Set-top Box (A).
Then, use the S-Video port on the front of the Adaptec
AVC-3610 to connect Set-top Box (B).
See the Figures in
for more information.
4
Connect an RF coaxial cable from
the TV In port on the
set-top box to
your
TV wall jack.
5
Connect the IR blaster cable from the Adaptec AVC-3610 to
your
set-top box. You must connect the IR blaster cable to
be able to change channels.
Note:
For dual-tuner connections, follow the instructions in
.
a
Plug the IR blaster cable into the IR 1 port on the Adaptec
AVC-3610.
b
Peel the protective paper off the emitter end of the cable,
then adhere it over, or as close as possible to, the infrared
lens of your set-top box.
6
Completing the Setup on page 25
.
Summary of Contents for AVC-3610
Page 1: ...Adaptec AVC 3610 Getting Started ...
Page 37: ...36 ...
