20
Installing on Windows Notebooks
Removing the USB2connect for Notebooks
Adapter –
Windows 2000 only
You must use the Unplug or Eject Hardware wizard to properly
remove the USB2connect for Notebooks adapter from your
computer.
To remove the adapter:
1
Open the Unplug or Eject Hardware wizard by clicking
the icon (shown at right) on your system tray, which is
at the bottom right corner of your desktop.
All three controllers are listed under Hardware devices:
■
1 x NEC PCI to USB Open Host Controller
■
2 x Adaptec AUA-1420 Card Bus to USB Enhanced Host
Controllers
2
Click any one of the three controllers, then click
Stop.
The adapter is stopped. (You don’t have to stop each controller
individually.)
3
Click
OK
.
It is now safe to remove your USB2connect for Notebooks
adapter.
