Adaptec 5325301638 - Snap Server 4500 NAS, Administrator'S Manual

Page: 35 / 148

FTP Access
Chapter 2 Network Access to the Server 21
Macintosh Access via a Browser When Only HTTPS Is Enabled
If HTTP access is disabled, the Snap Server cannot be accessed using Internet
Explorer 5.x for Macintosh. To resolve this issue, either use an alternate browser, or
re-enable HTTP access on the
Network > Web
screen.
Sherlock Support for MacOS
Sherlock is supported for MacOS 8.1, 9.1, and X v. 10.1.x. For MacOS X v. 10.2.x and
higher, the Find tool in the Finder window is fully supported.
Supported AFP Clients
The Snap Server supports MacOS 8.x, 9.x, and 10.x clients.
FTP Access
FTP settings are configured on the
Network > FTP
screen of the Administration Tool.
By default, FTP clients can access the server using the anonymous user account,
which is mapped to the Snap Server's
guest user account and AllUsers group
account. You can set share access and file access for anonymous FTP users by
modifying permissions for these accounts. For more granular control over FTP
access, you must create local user accounts for FTP users.
Supported FTP Clients
Snap Servers have been tested with the most common FTP clients and work as
expected based on the commands required by RFC 959.
Snap Servers have been
proven to work with these products: Internet Explorer 5.0 and later, Netscape
Navigator 4.0 and later.