Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

Page: 142 / 250

Antivirus Dependencies
126 SnapServer Administrator Guide
Antivirus Dependencies
The SnapServer implementation of CA e Trust Antivirus software includes the
following features:
HTTP Access and Antivirus Configuration
To access the CA e Trust Antivirus configuration interface, HTTP must be enabled
on the
Network > Web
screen.
Re-enabling the Antivirus Software
The antivirus software is enabled by default. If the antivirus software is reinstalled
(as part of an upgrade process, for example), you will need to enable the software
by going to the SnapExtensions screen and clicking
CA Antivirus
. On the CA
Antivirus screen, click the check box next to
Enable
, then click
OK
. If you want to
reconfigure the antivirus software (rather than using the defaults), click the
Configure eTrust Antivirus
link.
Resetting the Server Date and Time
If the current server date and time are changed to an earlier date and time (
Server >
Date/Time
), the change does not automatically propagate to any scheduled antivirus
operations. To synchronize scheduled antivirus operations with the new date and
time settings, you must reschedule each operation.
New jobs may be affected by the time change. Be sure to check that new jobs have
been executed if a date or time change has been made to the server.
Storage Configuration and the Antivirus Software
The antivirus software resides on the largest volume (that existed at the time the
software was installed). If you delete this volume, the CA e Trust Antivirus software
will also be deleted. The SnapServer automatically reinstalls the antivirus software
on the largest remaining volume on the system.
Note
The antivirus reinstallation process does not preserve custom antivirus
configuration settings. Make a note of any such settings before deleting a volume.