manualshive.com logo in svg

Adaptec 5325301507 - Snap Server 4400 NAS, Administrator'S Manual

Share
Download
Adaptec 5325301507 - Snap Server 4400 NAS Administrator'S Manual Download Page 13

SnapServer Administrator Guide

xiii

SnapServer Administrator Guide

xiii

Preface

Audience and Purpose

This guide is intended for system and network administrators charged with 

installing and maintaining SnapServers on their network. We assume the 

administrator is familiar with the basic concepts and tasks of multiplatform 

network administration.
This guide provides information on the installation, configuration, security, and 

maintenance of SnapServers. It also provides information on installing and using 

the following utilities and software components:
• The Administration Tool
• SnapServer Manager (SSM)
• VSS/VDS Hardware Provider
• Computer  Associates  eTrust Antivirus (CA 

e

Trust Antivirus)

• Third-party backup agents
Some of the information presented in this manual (particularly the Storage 

Configuration and Expansion sections) applies only to SnapServers with four (4) or 

more drives. Users of the SnapServer 110 and SnapServer 210 are encouraged to 

consult the 

User’s Guide for SnapServer 110 and 210

 as their primary reference and to 

refer to this Administrator’s Guide for advanced guidelines.

Service and Technical Support

For an immediate response to a service inquiry, use our Expert Knowledge Base 

System at

 http://www.snapserver.com/kb

. If you are unable to resolve your issue 

through the Knowledge Base, you can forward the question to our Technical 

Support department who will then e-mail you with a response. To obtain additional 

service or technical support for your SnapServer, call 1.888.343.SNAP.

Notes and Cautions

Conventions used to call out useful or important information are described below:

Note  

A note presents time-saving shortcuts related to the main topic.

Note  

A caution alerts you to potential hardware or software issues or hazards in 

the configuration or operation of SnapServers. Consider cautions carefully before 

proceeding with any operation.

 

Summary of Contents for 5325301507 - Snap Server 4400 NAS



























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands