Chapter 7: Installing the Driver and an Operating System
●
54
7
Complete the Linux installation, following the instructions included
with your operating system.
8
Continue with
Managing Your Storage Space on page 60
.
Installing with NetWare
Note:
You will need your NetWare installation CD to complete this
task.
To install the driver when installing NetWare:
1
Restart your computer, then install NetWare. (For instructions, refer
to your NetWare documentation.)
To be able to load additional drivers later, select
Manual
install mode
during the first part of the installation.
To load additional drivers:
a
Select
Modify
when the storage adapters are displayed.
b
Select
Storage adapters
and press the
Insert
key to add an
unlisted driver from the floppy disk.
2
When the Device Types screen appears, check the
Storage adapters
list and select
Modify
to add another driver.
3
Select
Storage adapters
, then press
Enter
.
All recognized controllers are displayed.
4
If
AACRAID
is detected, delete it.
5
Press
Insert
to add another driver.
The available drivers are displayed.
6
Insert the driver floppy disk.
7
Press the
Insert
key to scan the floppy disk drive.
Once the driver is selected, the Parameter screen is displayed.