manualshive.com logo in svg

Adaptec 1210SA - Serial ATA RAID Controller, User Manual, Page: 82 / 88

Share
Download
Adaptec 1210SA - Serial ATA RAID Controller User Manual Download Page 82

Glossary-4

Glossary

disk ID

Unique disk identifier that consists of the channel number, SATA 
ID. For example, (channel:ID:LUN) 1:04:0. See also 

channel

.

drive LED

Disk indicator LED that illuminates during read or write 
operations.

E

event

Notification or alert from the system, indicating that a change has 
occurred.

event log

File used to maintain information about prior controller activities 
or errors.

event notification

Process for transmitting events.

F

failed

State of a non-redundant array that has suffered a single drive 
failure, or a redundant array that has suffered multiple drive 
failures. A failed array is inaccessible and data is lost.

failed segment

A 

segment

 that is no longer usable by an array because it is either 

logically bad and therefore no longer needed, or physically 
damaged.

fault-tolerant array

Refers to an array that can continue to function after a disk drive 
failure without loss of data. Fault tolerant, or redundant arrays, 
include RAID 1 arrays. See also Redundant.

Summary of Contents for 1210SA - Serial ATA RAID Controller

























































































Reviews:

No comments