ADAM OPEL CD 300, Manual

Page: 89 / 213

Introduction 89
Usage
Control elements
The Infotainment system is operated
via function buttons, multifunctional
knobs and menus that are shown on
the display.
Inputs are made optionally via:
■ the central control unit in the
instrument panel
3
80
■ controls on the steering wheel
3
80
■ the speech recognition system (if
available)
3
178
Switching the Infotainment
system on or off
Press the
X
knob briefly. After
switching on, the last selected
Infotainment source is active.
Automatic switch-off
If the Infotainment system has been
switched on using the
X
knob when
the ignition was switched off, it will
switch off again automatically after
30 minutes.
Setting the volume
Turn the
X
knob. The current setting
is shown on the display.
When the Infotainment system is
switched on, the last selected volume
is set, provided that volume is lower
than the maximum start-up volume.
The following can be set separately:
■ the maximum start-up volume
3
98
■ the volume of the traffic
announcements
3
98
■ the volume of the navigation
messages (only Navi 600 /
Navi 900)
3
134
Speed compensated volume
When speed compensated volume is
activated
3
98 the volume is
adapted automatically to compensate
for the road and wind noise as you
drive.
Mute
Press the
v
/
G
button (if Phone portal
available: press for a few seconds) to
mute the audio sources.
To cancel mute again: turn the
X
knob or press the
v
/
G
button again
(if Phone portal available: press for a
few seconds).
Volume limitation at high
temperatures
At very high temperatures inside the
vehicle the Infotainment system limits
the maximum adjustable volume. If
necessary, the volume is decreased
automatically.
Modes of operation
Radio
Press the RADIO button to open the
radio main menu or to change
between the different wavebands.
Press the multifunction knob to open
a submenu with options for station
selection.
Detailed description of the radio
functions
3
102.