ADAM OPEL CD 300 Manual Download

Page: 172 / 213

172

Navigation

Dynamic route guidance only works if

traffic information is received via the

RDS-TMC traffic information system.
The possible delay due to a traffic

problem calculated by the

Infotainment system is based on data

that the system receives via the RDS-

TMC station currently set. The actual

delay may be different to that

calculated.

Maps

All map data required for use of the

navigation system is stored on an SD

card provided with the Infotainment

system.

Map SD card

The SD card reader of the

Infotainment system can only read

the SD card provided specifically for

use with the vehicle's navigation

system. The SD card reader cannot

read any other SD cards.
Due to production date of the map

data on the SD card, some new roads

may not be included, or some names

and roads may differ from those in

use at the time the map data was

produced.
To order additional SD cards or an

update of the map data, contact your

Opel Service Partner.
Replacing a map SD card, see below .

Important information on SD card

handling

Caution

Never attempt to use an SD card

that has been cracked, deformed

or repaired using adhesive tape.

Doing so may damage the

equipment.

■ Handle the SD card with care.

Never touch the metal contacts.

■ Do not use any conventional

cleaner, benzine, thinner, or

antistatic spray.

■ If you need to clean the SD card,

use a soft cloth.

■ Do not bend the SD card. Do not

use any SD card that is bent or

cracked.

■ Do not put any sticker or write

anything on either surface.

■ Do not store the SD card in

locations exposed to direct

sunlight, or in high temperatures or

humidity.

■ Always place the SD card in its

storage case, when not in use.

Replacing a map SD card

The SD card slot is located in the

centre console on a hinged panel.

Summary of Contents for CD 300






















































































































































































































Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands

ADAM OPEL CD 300, Manual

Search results

Summary of Contents for CD 300

Reviews:

Related manuals for CD 300

Brands by name

Popular brands