background image

We accept no liability should any damage result from the failure to comply with the ins-

tructions contained in this technical manual.

Essential recommendations for safety
• 

 It is strictly prohibited to carry out any modifications to the appliance without 

the manufacturer’s prior and written agreement.

• 

 The product must be installed by a qualified engineer, in accordance with 

applicable local standards and regulations.

• 

 The installation must comply with the instructions contained in this manual and 

with the standards and regulations applicable to domestic hot water tanks. 

• 

 Failure to comply with the instructions in this manual could result in personal 

injury or a risk of environmental pollution.

• 

 The manufacturer declines all liability for any damage caused as a result of 

incorrect installation or in the event of the use of appliances or accessories that 

are not specified by the manufacturer.

Essential recommendations for the correct operation of the appliance
• 

 In case of anomaly, please call your installer for advice.

• 

 Faulty parts may only be replaced by genuine parts.

• 

Our water heaters are designed and manufactured for the exclusive purpose of 

heating and storing domestic hot water.

• 

The domestic hot water heaters must only be heated using hot water in a closed 

circuit.

General remarks
• 

 The availability of certain models as well as their accessories may vary according 

to markets.

• 

 The manufacturer reserves the right to change the technical characteristics 

and features of its products without prior notice. Please check for an updated 

version of this manual on the website www.acv.com.

• 

The part number (P/N) and serial number (S/N) of the appliance are indicated on 

its rating plate and must be provided to ACV in case of warranty claim. Failure 

to do so will make the claim void.

• 

 In spite of the strict quality standards that ACV applies to its appliances during 

production, inspection and transport, faults may occur.  Please immediately 

notify your approved installer of any faults.

NOTES

This manual contains important information with respect to the installation, the starting up 

and the maintenance of the appliance.

This manual must be provided to the user, who will read it carefully and keep it in a safe 

place.

Smart Green : A1009652 - 661Y3000 • D

General Recommendations

EN

4

Summary of Contents for Smart Green 130

























Reviews: