48
皇晶科技股份有限公司
Acute Technology Inc.
Copyright
2018
Software Glitch filter settings
This filter function can be set to filter the signals with pulse width range from 1 ps to
1ms. Enable this filter function will only change the display and decode contents, the
trigger and recordable time will remain not effected. Disable this filter function will
restore all waveform contents back to the original unfiltered waveform.
Timing check
Import the .csv file of the timing check items; the parameters and measurement
items must be input to the file beforehand. There are two main measurements, as
follow; you can also check whether it meets the design value.
1. HW Strap: Measure the actual voltage at the sample points.
