42
皇晶科技股份有限公司
Acute Technology Inc.
Copyright
2018
There are two methods for hardware wiring:
MSO is the Master, while the oscilloscope is the Slave.
Wiring direction is from MSO’s Trig-Out the oscilloscope’s Trig-In (see Figure 1)
In Figure 1, the USB or Ethernet (TCP / IP) interface is connected to the computer,
and then connect the BNC-MCX cable to the MSO Trig-Out and the trigger input
interface (Ext-Trig, Aux-In or Trig-In) of the oscilloscope. MDO4000 series is fixed in
the analog channel CH4.
The oscilloscope is the Master, while the MSO is the Slave.
Wiring direction is from the oscilloscope’s Trig-Out MSO’s Trig-In (see Figure 2).
Figure 1
Figure 2
