n
Setting Up the Jack
1. Place the jack under the jacking
point closest to the tire to be
changed.
2. Turn the end bracket clockwise (as
shown in the image) until the top
of the jack contacts the jacking
point. Make sure that the jacking
point tab is resting in the jack
notch.
3. Raise the vehicle, using the jack
handle bar and the jack handle,
until the tire is off the ground.
HANDLING THE UNEXPECTED
126 |
n
Replacing the Flat Tire
1. Remove the wheel nuts and flat
tire.
2. Wipe the mounting surfaces of the
wheel with a clean cloth. Mount
the compact spare tire. Replace the
wheel nuts and lightly tighten
them.
3. Lower the vehicle and remove the
jack. Tighten the wheel nuts in the
order indicated in the image. Go
around, tightening the nuts, two to
three times in this order. Do not
overtighten the wheel nuts.
HANDLING THE UNEXPECTED
| 127
