Power Moonroof Operation
The moonroof can be opened and closed when the vehicle is on by using the
switch on the ceiling.
n
Automatic Operation
To open: Firmly pull the switch back,
then release.
To close: Firmly push the switch
forward, then release.
The moonroof opens or closes
completely. To stop the moonroof at
any time, push the switch briefly.
n
Manual Operation
To open: Pull the switch back lightly.
To close: Push the switch forward lightly.
Release the switch when the window reaches the desired position.
n
Moonroof Tilt
To tilt: Push the center of the switch.
To close: Push the switch forward firmly, then release.
Opening the moonroof in below freezing temperature or when it is covered
with snow or ice can damage the moonroof panel or motor.
Opening or closing the moonroof on someone’s hands or fingers can
cause serious injury.
Make sure all hands and fingers are clear of the moonroof before opening
or closing it.
VEHICLE CONTROLS
44 |
Interior and Exterior Lights
Operate interior and exterior lights when the vehicle is on or off.
n
Brightness Control
Adjust instrument panel brightness
when the vehicle is on.
To brighten: Press the + button.
To dim: Press the - button.
A beep sounds when the brightness
reaches its minimum or maximum.
n
Interior Lights
Change the interior light settings using the switches on the ceiling.
ON position: Interior lights remain on.
Door-activated position: Interior
lights come on when any of the doors
are opened, the driver’s door is
unlocked, or the vehicle is turned off.
OFF position: Interior lights remain
off.
VEHICLE CONTROLS
| 45
