AEVU-751-X86 User Manual
3.3.4 Stand Mounting
The AEVU-751-X86 has Video Electronics Standards Association (VESA) standard
mounting
holes tapped into the rear panel. The monitor stand mounting plate has a matching VESA
hole pattern. To mount the AEVU onto a stand, please follow the steps below.
Step 1:
Line up the threaded holes on the monitor rear panel with the screw holes on the
monitor stand mounting plate.
Step 2:
Secure the monitor to the stand with the supplied retention screws (
Figure
222H222H
3-17
).
Figure 3-17: Stand Mounting
3.4 Software
The AEVU-751-X86 comes with a pre-installed Windows CE 6.0
A.1 RoHS Compliant
All models in the AEVU series comply with the Restriction of Hazardous Materials
(RoHS) Directive. This means that all components used to build the industrial
workstations and the workstation itself are RoHS compliant.
The RoHS Directive bans the placing on the EU market of new electrical and electronic
equipment containing more than agreed levels of lead, cadmium, mercury, hexavalent
chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE)
flame retardants.
A.2 IP 64 Compliant Front Panel
The front panels on all models in the AEVU series have an ingress protection rating (IP)
of 64, IP 64 or greater. The front panels are protected from dust particles and splashed
water.
Page 17
