Acura 2007 Acura RL Owner'S Manual Download Page 49

Page: 49 / 491

CONTINUED

To install a LATCH-compatible child
seat:

Move the seat belt buckle or
tongue away from the lower
anchors.

Your vehicle is equipped with
LATCH (lower anchors and tethers
for children) at the outer rear seats.

Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.

Push the rear head restraint tilt
button on the ceiling console to
pivot the head restraints down.

The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.

The location of each lower anchor is
indicated by a small button above the
anchor point.

Installing a Child Seat

Installing a Child Seat with
LATCH

Dr
iv

er
and

asseng

er
Saf

LOWER
ANCHORS

REAR HEAD RESTRAINT TILT BUTTON

BUTTON

０６／０８／１２１８：２４：２０３１ＳＪＡ６２０００５２

Main Menu

Table of Contents

Summary of Contents for 2007 Acura RL












































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Acura RL

Reviews:

Related manuals for 2007 Acura RL

Brands by name

Popular brands

Acura 2007 Acura RL, Owner'S Manual

Search results

Summary of Contents for 2007 Acura RL

Reviews:

Related manuals for 2007 Acura RL

Brands by name

Popular brands