Acura 2007 Acura RL Owner'S Manual Download Page 139

Page: 139 / 491

−

MIST
OFF
INT Intermittent
LO Low speed
HI High speed
Windshield washers

Push the right lever up or down to
select a position.

The wipers run at high

speed until you release the lever.

The wipers are not activated.

The wipers run at low speed.

The wipers run at high speed.

The length of the wipe

interval is varied automatically
according to vehicle speed.

If you turn it to the shortest delay,
the wipers change to low speed
operation when the vehicle speed
exceeds 12 mph (20 km/h).

To change the ‘‘WIPER ACTION’’
setting, see page

1.
2.
3.
4.
5.
6.

134

CONTINUED

MIST

OFF

INT

Windshield Wipers and Washers

Inst

nt
s

Cont

137

０６／０８／１２１８：３５：５５３１ＳＪＡ６２００１４２

Main Menu

Table of Contents

Summary of Contents for 2007 Acura RL












































































































































































































































































































































































































































































































Search results

Summary of Contents for 2007 Acura RL

Reviews:

Acura 2007 Acura RL, Owner'S Manual, Page: 139 / 491

Search results

Summary of Contents for 2007 Acura RL

Reviews: