2 of 5
BII12560-14 (1907)
© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
INSTALLATION
Client Information:
The information in this installation
instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
1.
Disconnect the negative cable from the battery.
NOTE: For Hybrid vehicle, make sure not to
disconnect the negative cable from the battery three
minutes after turning the engine switch to OFF.
2.
Remove the pull pocket cap and the self-tapping
screw.
PULL POCKET CAP
SELF-TAPPING
SCREW
5 RETAINING
TABS
LEFT FRONT
DOOR PANEL
3.
Remove the left front door panel and unplug the
vehicle connectors.
5 CLIPS
VEHICLE
CONNECTORS
LEFT FRONT
DOOR PANEL
LEFT FRONT
DOOR
3 CLIPS
10 CLIPS
