background image

Acuity Brands | One Lithonia Way Conyers, GA 30012 | Phone: 800.535.2465 | www.nlightcontrols.com | © 2020 Acuity Brands Lighting, Inc. | All rights reserved. | Rev. 09/17/2020 

Schedule Configuration Dashboard 

Light Control Dashboard 

 

 

The Schedule Configuration Dashboard is the primary 

screen for creation and configuration of schedules. 

Through this screen, administrations can program Normal 

as well as Holiday schedules 

The Light Control Dashboard allows administrators the 

ability control lights directly from this screen. 

Manipulating the control elements from this screen will 

impact devices all channels. 

 

Home Dashboard 

The Home Dashboard enables the ability to view the start and End Triggers of schedules configured to run in the 

current date. Events that have already executed are in the section above the time placer, events to be run are located 

under. As time passes and events are executed, they will transition from the bottom section to the top section. 

 

Home Dashboard Screen 

Description 

 

The Home Dashboard enables the ability to view the start and End 

Triggers of schedules configured to run in the current date.  Events that 

have already executed are in the section above the time placer, events to 

be run are located under. As time passes and events are executed, they 

will transition from the bottom section to the top section. 

1.

 

Prior events section – Section designated to hold the list of 

events that have already run today. 

2.

 

Upcoming events section – Section designated for events that 

are still to run today. 

3.

 

Hamburger Menu – Activates the sidebar menu to expose more 

configuration functions. 

4.

 

Calendar button – Directs users to the calendar view, where they 

can preview events/schedules to be run in other dates. 

5.

 

Dashboard navigation bar – Enables transition between different 

dashboards. 

Summary of Contents for NLIGHT nDTC




































Reviews: