ACU-RITE MILLPWR G2, Technical Manual

Page: 71 / 546

4.2 Managing Parameters 71
Entering and
editing parameters In order to change the input values, open an input or selection dialog box for
the selected parameter with the RIGHT ARROW key,
ENTER key.
In selection dialogs, press the UP/DOWN ARROW key and then the ENTER key
to select the desired value from the list.
Units of measurement can be defined for numeric machine parameters. The
unit of measurement assigned to this parameter is displayed. Enter a value
appropriate to this unit.
Limit values Limit values are displayed for numeric machine parameters. If you attempt to
enter a value outside of these limits, a message is issued and the entry is not
accepted.
Copy/Paste value
function in
ConfigEditor

In ConfigEditor you can copy entered values and insert them at another loca-
tion (copy/paste function). If a dialog box is open, then the two
COPY FIELD
and PASTE FIELD soft keys are available.
Deleting objects Press the DELETE key to delete objects or parameters from a list (an axis, for
example).
Inserting and
copying objects Press the INSERT or COPY key to insert or copy objects or items in lists (an axis,
for example). Items in lists (arrays) are inserted after the cursor.
When inserting an object, the object name (key name) and memory file must
be given. The memory file is the *.cfg file in which the inserted object is to be
saved. Press the UP/DOWN ARROW key or the
ENTER key to select the file.
The icons of empty objects, lists and parameters appear dimmed. They can be
activated with the
INSERT key.