ACU-RITE MILLPWR G2, Technical Manual

Page: 433 / 546

6.6 Error Messages and Log Files 433
Error text file Error texts are defined directly in the PET table (max. 32 characters; not lan-
guage-sensitive) or in the error text file. In the error text file, you define the
error text to be displayed as well as the information on the cause of error and
corrective action.
Error text files are language-sensitive. The path for the error text file is perma-
nently defined: %OEM%\plc\language\en (or another language abbreviation).
In MP_System/DisplaySettings/CfgDisplayLanguage/plcErrorLanguage, you
define the language to be used.
You define the name of the error text files in MP_errorText.
MP_errorText
Text file for PLC error messages
Format: String
Input: Path and file name of the PET table
Structure of the
PET table The PLC error message table (*.PET) consists of the following columns, to
which you can assign special attributes:

NR
Line number in the table. The modules select the PLC error message by
assigning the line number.

ERROR
There are the following ways to specify the error text:
• Direct entry of the error text (max. 32 characters)
• Line number of the PLC error text file (# <line no.>) defined in
MP_errorText.

MARKER
The PLC error message can be activated without module call by setting the
marker defined here. The marker is also set if the error message was acti-
vated through Module 9085. Enter the symbolic name of the marker to be
set.
Entry 0: No error marker