Actron CP9190, User Manual

Page: 127 / 238

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 5
Ford Historic (OBD I) Diagnostics
6
✓
If a recording currently exists in
memory, a message to ERASE
OLD RECORDING displays.
✓
The Scan Tool maintains only one recording at a time, so be sure
to thoroughly review an old recording before erasing it. Power to
store recordings is provided by the Scan Tool’s internal battery,
thus, recordings are stored in memory only for the life of the
battery.
✓
Once the communication link has been established, you are ready
to record data.
Never operate the Scan Tool while driving. Have
another person assist with the operation of the
Scan Tool.
2. Start recording.
•Recording starts when the
ENTER
key is pressed.
✓
The Scan Tool records for a
varying time duration. The
recording consists of 5 frames of
data prior to the trigger point, and
approximately 20 seconds after
the recording. All applicable data
parameters are recorded for the
vehicle.
No
Previous recording
in memory. Do you
want to erase it and
make a new one?
Record Data
<Yes>
!
CAUTION
Press ENTER any time
to start recording.
**Ready to Record**