ActivMedia Robotics MOBILEROBOTS Team AmigoBot-SH Operation Manual Download

Page: 59 / 61

Warranty & Liabilities

Your M

OBILE

OBOTS

platform is fully warranted against defective parts or assembly for one

year after it is shipped to you from the factory. Accessories are warranted for 90 days.

Use only M

OBILE

OBOTS

-authorized parts, or warranty void. This warranty also explicitly

does not include

damage from shipping or from abuse or inappropriate operation, such

as if the robot is allowed to tumble or fall off a ledge, or if it is overloaded with heavy

objects.

The developers, marketers, and manufacturers of M

OBILE

OBOTS

products shall bear no

liabilities for operation and use of the robot or any accompanying software except that

covered by the warranty and period. The developers, marketers, or manufacturers shall
not be held responsible for any injury to persons or property involving M

OBILE

OBOTS

products in any way. They shall bear no responsibilities or liabilities for any operation or

application of the robot, or for support of any of those activities. And under no
circumstances will the developers, marketers, or manufacturers of M

OBILE

OBOTS

product

take responsibility for support of any special or custom modification to M

OBILE

OBOTS

platforms or their software.

Summary of Contents for MOBILEROBOTS Team AmigoBot-SH






























































Search results

Summary of Contents for MOBILEROBOTS Team AmigoBot-SH

Reviews:

Related manuals for MOBILEROBOTS Team AmigoBot-SH

Brands by name

Popular brands

ActivMedia Robotics MOBILEROBOTS Team AmigoBot-SH, Operation Manual

Search results

Summary of Contents for MOBILEROBOTS Team AmigoBot-SH

Reviews:

Related manuals for MOBILEROBOTS Team AmigoBot-SH

Brands by name

Popular brands