background image

Snow Thrower

Snow Thrower 

IMPORTANT! 

Safety Instructions
All Operators Must Read These

Instructions Before Use

Any electrical appliance can be dangerous if used incorrectly.

Some of the safety precautions given in this manual apply

generally to many appliances. Other warnings are specific to

the use of this snow thrower.

General Safety WARNINGS!

You and any other operator of this snow thrower must read,

understand and follow these instructions in their entirety, and

should re-read them at the start of each snow season. Failure

to follow any instruction may result in BODILY INJURY (including

electric shock) or possible FIRE.

Notice the personal safety alert symbol 

m

used in this

manual to draw your attention to a WARNING given
along with the particular operating instruction. This
means that an operation requires special ATTENTION,
CAUTION, and AWARENESS.
1. Keep children, pets, and others away from the work

area:

Be aware that the normal noise of the machine 

when turned on may make it difficult for you to hear 

approaching people. 

2. Use the electric cord and extension cord safely: 

A.

Keep cord away from heat sources and sharp objects. 

B.

Prevent oil or other fluids from spilling onto snow thrower

or cord.

C.

Never carry the snow thrower by cord or yank it to 

disconnect from electrical outlet. Keep cord away 

from heat, oil, and sharp edges.

D.

Replace or properly repair damaged cords. If cord is

damaged in any manner while plugged in, pull extension

cord from wall receptacle.

E.

Extension Cord: WARNING – Only use a UL rated

extension cord for OUTDOOR, all-weather use (usually

orange color). To prevent the disconnection of the

snow thrower from the extension cord during operation, 

make a knot as shown on page 5; see WARNING box 

on page 5 for more cord information. 

3. Wear proper clothing: 

Wearing rubber boots offers 

additional protection from electric shock when operating 

this snow thrower. Do not wear loose clothing that may 

become caught in the machine.

4. Moving parts present risks:

Keep hands away from

moving parts. Guards must be properly placed to protect

operator. Shut off and disconnect cord before touching 

any parts other than the handles and switch.

5. Hand-held operating position: 

Operating this snow

thrower in the hand held position is unsafe.

6. Surfaces:

This snow thrower is intended for use on paved 

surfaces. The unit should not be used on gravel or 

stone surfaces.

7. Unintentional operation:

Do not carry plugged-in 

snow thrower with finger on switch. Be sure that the

switch is off when plugging in.

8. Body position:

Be aware of your footing and body

positioning to maintain proper balance at all times; watch

for uneven surfaces and don!t overreach. 

9. Excessive force:

The snow thrower was designed to

respond at a certain rate for various snow conditions for

optimum safety and performance. Don!t force it; keep

pressure constant.

10. Hitting an object:

If the snow thrower accidentally 

strikes an object, first stop; remove key then plug. 

Inspect for damage; repair or replace part before using

the snow thrower again.

11. When work is completed:

Disconnect from the power

source when not in use, when changing accessories, and

before performing any maintenance function. 

12. Store safely:

Store indoors in a dry area between uses. 

Store in a locked area, where children and unauthorized 

people cannot gain access. 

13. Maintain for safety and longevity

: See instructions in 

this operator!s manual for proper maintenance. Use only

those replacement parts made for your model.

14.

The use of any other accessory or attachment might 

increase the risk of injury.

© 2010 by Snow Joe, LLC

All rights reserved. Original instructions. 

Save These Instructions

OPERATOR’S MANUAL

Model No. 322P

Form No. 7322P-880E

1

A Division of Snow Joe, LLC

Summary of Contents for 322P









Reviews: