Active Tools CoxOrb Platinum Wiring Loom Instructions For Installing Download Page 1

Page: 1 / 3

Thank you for purchasing a CoxOrb Platinum wiring loom. The following information

will help you get the most from it but if you do have any queries please email us at

or contact your local distributor.

Installing your New CoxOrb Platinum Wiring Loom

Jumper Lead

Connection Harness

Rate Lead and Magnet (Optional)

Modular Harness

How is it Different to Standard Looms?

Each loom is supplied with a Jumper Lead, Bulkhead Connector Mount and a Surface

Connector Mount.

The sacrificial Jumper Lead joins the CoxOrb to the connection harness and is designed to

be easily replaced when the end connector eventually fails. It can be mounted using either

the Bulkhead Connector Mount or the Surface Connector Mount.

Impeller

Bulkhead Connector Mount

Surface Connector Mount

Available in two lengths.

Summary of Contents for CoxOrb Platinum Wiring Loom

Page 1: ...ate Lead and Magnet Optional Modular Harness How is it Different to Standard Looms Each loom is supplied with a Jumper Lead Bulkhead Connector Mount and a Surface Connector Mount The sacrificial Jumpe...

Page 2: ...cohol swabs provided 2 Place the end of the wiring loom into the Surface Connector Mount so the rubber connector sits flush with the end of the Surface Connector Mount 3 Using either the adhesive pads...

Page 3: ...oof Command Strip and firmly press the impeller into place 7 Wait 12 hours before using the boat as the adhesive requires that amount of time to cure Note The Impeller can be easily removed by pulling...