AT-1212 User Guide and Specifications - 7 -
www.activetechnologies.it
Front Panel and Connector Pinouts
Table 2 shows the front panel connectors and signal descriptions for AT-1212. Refer to the
Specifications
sheet for additional signal information.
Caution
To avoid permanent damage to the AT-1212, disconnect all signals connected to the AT-1212
before powering down the module, and connect signals only after the adapter module has been
powered on by the NI FlexRIO FPGA module.
Device Front Panel
Connector
Signal Description
TRIG IN
SMA input connector for Trigger IN
TRIG OUT
SMA output connector for Trigger Out
AO 1+
Differential analog channel 1
AO 1-
Differential analog output- channel 1
AO 0+
Differential analog channel 0
AO 0-
Differential analog output- channel 0
CLK IN
SMA input connector for external clock
*
When using single-ended output, terminate the unused output
with a 50 Ω
terminator.
Summary of Contents for AT-1212
Page 41: ......
