AT-1212 User Guide and Specifications - 4 -
www.activetechnologies.it
AT-1212 User Guide and Specifications
The AT-1212 is a two-channel, 1.25 GS/s, 14-bit, 480 MHz Analog Bandwidth, High-Speed Signal
Generator adapter module designed to work in conjunction with your NI
FlexRIO™
FPGA module.
This document contains signal information and specifications for the AT-1212R, which is composed of
an NI FlexRIO FPGA module and the AT-1212. This document contains tutorial sections that
demonstrate how to generate signals using a LabVIEW FPGA example VI and how to create and run
your own LabVIEW project with the AT-1212R.
Note
Before configuring your AT-1212, you must install the appropriate software and
hardware. Refer to the
NI FlexRIO FPGA Module Installation Guide and Specifications
for
installation instructions. Figure 1 shows an example of a properly connected NI FlexRIO
device.
Figure 1
. NI FlexRIO Device
Note
AT-1212R
refers to the combination of your AT-1212 adapter module and your NI
FlexRIO FPGA module.
AT-1212
refers to your AT-1212 adapter module only.
Summary of Contents for AT-1212
Page 41: ......
